Features

• Suitable for any lamp, including energy saving bulbs.
• Operate on single LIVE wire, no rewiring required.
• Can be used for fan.
• Programmable channels, up to 20 channels.
• Come with 1 gang, 2 gangs, 3 gangs, and 4 gangs.
• With sleeping timer/ count down timer.
• With mode memory when power off.
• With LED indicators.
• Replaceable front cover.
• Ultra low power consumption.

Our Remote Control

Features

• Transmission distance up to 15 meters
• With LEDs indication.
• Anti slip design.
• Runs with 2 AAA batteries.
• Thin body.
  

Advantages as compared to other remote control switches in the market

1. No re-wiring required, our products run on the traditional wiring. Which only Live wire is routed to the switches, and Neutral line is not available
2. First and only company that produce the remote control switch with single wire that can turn off the sensitive energy saving light bulbs.
3. Almost no alteration on the power that is going into the bulb. Some design will consume some of the power going to the light bulb, and it will cause some of the energy saving bulbs to generate the audible noise, because of the altered power supply.
4. Our products consume much lower power than others.
5. Our products have separate power supply circuit for every gang. Most of the existing products in the market only have on power supply set to lamp no.1, in case when the lamp no.1 is taken out or the connection broken, the remote control switch will be no longer functional until the lamp is replaced.
   Our products will run on any gang.
6. Our products can run on fan.
7. Our products have very high immunity at noisy environment. Some of the products cause the off state energy saver to flicker when they are turning on the noisy lamp or fan.

No additional capacitor or resistor required, click the image to enlarge.